Parameters：
Two Parameters：NIBP, Pulse Rate.
Waveforms：
No Waveform
Features：
1. Compact, small, light, easy for carrying and handling
2. LED and LCD display
3. Audio and visual alarm with freely set limit
4. Storage and review of patient’s data up to 900 groups which is never lost even when power’s off
5. Two kinds of reviewing the data: In list or in single group.
6. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries
7. Automatic power-off without signal for 10 min.
8. Patient’s trend can be transmitted to a personal computer for display，saving and printing
9. Suitable for adult and pediatric
Applications：
NIBP Patient Monitor can be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Standard Packing List：
NBIP Patient Monitor main unit 1pc
NIBP extension tube 1pc
Adult NIBP cuff 1pc
AC power adaptor 1pc
Communication cable 1pc
The operator’s manual 1pc
Selectable Accessory:
Child NIBP cuff
Specifications:
1. NIBP:
Patient: Adult and Pediatric
Measurement method: Oscillometric
Range：Adult:30mmHg~255mmHg Pediatric: 30mmHg~160mmHg
Measurement unite: mmHg/kPa selectable
Measurement mode: Manual, Auto, STAT
Measurement Type: SYS, DIA, MAP
Measurement interval in AUTO mode:1,2,3,5,10,15,20,30,60,90Min
Measuring period in STAT mode: 5 Min
Resolution：1mmHg
Over-pressure protection：Adult:300mmHg Pediatric:220mmHg
2. PR:
Range：30bpm~250bpm
Resolution：1bpm
Accuracy: ±2bpm
3. Alarm
Mode: Audio and visual alarm, the measurement and LED light flash, and the speaker sounds the alarm.
Setup: High and low alarm limits adjustable.
4. Storage and Review
900groups data with corresponding date and time.
5. Display Mode
Type: 128×64 dot matrix homochromy LCD and LED
Backlight color: White
LED Light: Dual-color LED (red/green) and homochromy LED
Temperature
Operation：0°C~45°C
Transportation and storage：-20°C~60°C
Humidity
Operation: 15%~95 %( non-condensing)
Transportation and storage: 10%~95% (non-condensing)
Altitude
Operation：86kPa ~106kPa
Transportation and storage：50kPa~106kPa
7. Power Requirements
AC power adaptor
Input: AC 100～240V, 50/60Hz, 0.7A
Output: DC 8.4V，1A
Internal battery
Type: 1.5Ahr/8.4V Li rechargeable battery
Operating Time: 15 hours of stand-by time with a full battery.
Recharge time: 5 hours
8. Dimension 160mm×148mm×85mm
9. Net Weight 560g
